Hyundai Sonata Turn Signals LEDs! See Installed Photos! Ships same-day! - Hyundai Sonata Forum
Reply
 
LinkBack Thread Tools
post #1 of 32 Old 01-25-2013, 12:32 PM Thread Starter
Site Sponsor
 
Diode Dynamics's Avatar
 
Join Date: Dec 2012
Location: St. Louis
Posts: 342
(Thread Starter)
Arrow Hyundai Sonata Turn Signals LEDs! See Installed Photos! Ships same-day!




Hyundai Sonata LED Tail/Turn Signal LEDs




From the factory, your Hyundai Sonata's tail light bulbs are powered by standard incandescent lights that light up white in color, and cast light through your red or amber tail light lens. This results in a washed-out color.

Newer luxury vehicles are using LEDs for turn signals, because LEDs offer a crisp, instant on/off function, increased brightness, and true, vibrant color. By replacing the bulbs in your Sonata, you can achieve this modern look!

Brightness

Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb compared to factory:

HP11: (310 lumens) Slightly higher brightness than OEM bulbs.

XP80: (510 lumens) Much brighter than OEM bulbs. These are bright!

Bulb Design:

HP11: Four side-firing 1.5W-rated Osram LED chips, and one 5W-rated LED chip on top, which is projected by a lens for maximum effective brightness. The bulb is housed in a machined aluminum casing, which provides superior heat diffusion for long life.

XP80: Each of the four sides of this bulb contains three 5W-rated chips, and the top is fitted with four more under a projector lens. This is the brightest self-contained automotive LED bulb on the market, and is housed in an aluminum casing with a textured finish for maximum heatsinking properties.

Included in your order is TWO BULBS.


Front Turn Signal LEDs for 1999-2005 Hyundai Sonata (pair)

Front Turn Signal LEDs for 2006-2016 Hyundai Sonata (pair)

Tail Light LEDs for 1999-2016 Hyundai Sonata (pair)

Rear Turn Signal LEDs for 1999-2001 Hyundai Sonata (pair)

Rear Turn Signal LEDs for 2002-2005 Hyundai Sonata (pair)

Rear Turn Signal LEDs for 2006-2016 Hyundai Sonata (pair)





(XP80 installed)

All of our products come with a 30-day satisfaction guarantee and a 3-year limited warranty.


If you have any questions, please don't hesitate to post, PM, email[email protected] or call: (314) 205-3033

*PM us for the free-shipping code* (U.S. forum members only)

Thanks for looking!
Nick C.
Diode Dynamics



Last edited by Diode Dynamics; 08-02-2017 at 09:44 AM.
Diode Dynamics is offline  
Sponsored Links
Advertisement
 
post #2 of 32 Old 02-18-2013, 10:23 PM
Junior Member
 
Join Date: Jan 2012
Posts: 6
Nice looking product advertisements but it would be better if you included the actual wiring connections necessary to install your product.
RE: I have a 2005 Hyundai Sonata and going into the passengers side Turn/running light socket I have three wire colors Brown/Blue/Black and on the Drivers side I have Red/Black/Green. Now just which wires do I connect the Load Resistor to?
gbarbur is offline  
post #3 of 32 Old 02-18-2013, 11:05 PM Thread Starter
Site Sponsor
 
Diode Dynamics's Avatar
 
Join Date: Dec 2012
Location: St. Louis
Posts: 342
(Thread Starter)
We'd be happy to help anyone with the installation- usually I'd simply ask to email us at [email protected].com

However, I can tell you right away that you'll need to tap the black and blue on passenger, and black and green on driver.

Thanks!
Paul
Diode Dynamics is offline  
 
post #4 of 32 Old 02-19-2013, 04:59 PM
Junior Member
 
Join Date: Jan 2012
Posts: 6
One more question: Is the Load Resistor polarity sensitive? If so which is positive and which is negative?
gbarbur is offline  
post #5 of 32 Old 02-19-2013, 05:00 PM Thread Starter
Site Sponsor
 
Diode Dynamics's Avatar
 
Join Date: Dec 2012
Location: St. Louis
Posts: 342
(Thread Starter)
No, resistors do not require specific polarity.

Thanks!
Paul
Diode Dynamics is offline  
post #6 of 32 Old 03-05-2013, 08:49 PM
Junior Member
 
Join Date: Mar 2013
Posts: 21
So for the '13 Sonata, your site says a flasher replacement is available. Is this correct? Do you know where the flasher is under the dash and is it easy to access or am I taking things apart?
Mike2181 is offline  
post #7 of 32 Old 03-05-2013, 08:56 PM Thread Starter
Site Sponsor
 
Diode Dynamics's Avatar
 
Join Date: Dec 2012
Location: St. Louis
Posts: 342
(Thread Starter)
The flasher is only available until 2005. After that, it is digital and requires a flasher module. I'm sorry for any confusion.

Paul
Diode Dynamics is offline  
post #8 of 32 Old 06-11-2015, 09:00 AM
Junior Member
 
Join Date: Jun 2015
Posts: 5
Quote:
Originally Posted by Diode Dynamics View Post
The flasher is only available until 2005. After that, it is digital and requires a flasher module. I'm sorry for any confusion.

Paul

I know I'm bringing up an older thread, but I am very active on Hyundai Forums, and just came across this forum.

I have the load resistors installed on the rear turns, installed the 510 Lumen XP80 LEDs in the rear, but have not changed my front bulbs yet. Will I need those resistors, or will I be able to return those if not needed? (I purchased 2 load resistor kits). I have XP80's for the fronts as well.

Thanks Diode!
JJGeneral1 is offline  
post #9 of 32 Old 06-11-2015, 09:03 AM Thread Starter
Site Sponsor
 
Diode Dynamics's Avatar
 
Join Date: Dec 2012
Location: St. Louis
Posts: 342
(Thread Starter)
Quote:
Originally Posted by JJGeneral1 View Post
I know I'm bringing up an older thread, but I am very active on Hyundai Forums, and just came across this forum.

I have the load resistors installed on the rear turns, installed the 510 Lumen XP80 LEDs in the rear, but have not changed my front bulbs yet. Will I need those resistors, or will I be able to return those if not needed? (I purchased 2 load resistor kits). I have XP80's for the fronts as well.

Thanks Diode!
Turn signal locations will require you to install resistors to prevent hyperflashing.

You'll need to add a resistor for each incandescent turn signal bulb that you replace with an LED

Feel free to give us a call if you have any questions: (314) 205-3033

Thanks!
Nick C.

Diode Dynamics

(314) 205-3033

Sonata:
To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Diode Dynamics is offline  
post #10 of 32 Old 06-11-2015, 09:09 AM
Junior Member
 
Join Date: Jun 2015
Posts: 5
Quote:
Originally Posted by Diode Dynamics View Post
Turn signal locations will require you to install resistors to prevent hyperflashing.

You'll need to add a resistor for each incandescent turn signal bulb that you replace with an LED

Feel free to give us a call if you have any questions: (314) 205-3033

Thanks!
Nick C.

Nick, the front bulbs are in a "cap" type of setup. I do not see any wires to them. To change the front bulb, you go in through the wheel well, and pop off a cover, then reach in, unscrew the bulb cap, and the bulb is in there with it, the whole assembly, cap and bulb come out, with no wires. The cap has contacts which connect to the housing when put back in and locked in.

I do not see the wiring harness, and earlier in this thread, it said that only one set of load resistors was needed (either front OR rear) to cover the entire load. Was that a load? or do I need to find the wiring harness of the front headlamp assembly, and figure out which wires are for the turns?

New Hyundai Owner as of Feb. 2014

2013 Sonata Hybrid Base

Firefighter/Fire Police/First Responder (I have flashy lights on my car! People think I'm a cop with the lightbar on top. LOL!)
JJGeneral1 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Hyundai Sonata Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










User Tag List

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome