Sonata Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
109 Posts
Discussion Starter · #1 · (Edited)
I didn't see this DIY in this forum or the Hyundai forum; yea I know its a simple thing to do, but still, for those who are not mechanically inclined this shows how easy it can be done.

Basically you just loosen up the hose clamp, separate the intake valve from the filter box top, clean out the filter box, replace the OEM filter with the K & N Performance filter and put it back together again. I did have a little difficulty separating the valve and the box top, but that was about it; otherwise its take out, clean and drop in.

AIR INTAKE AND AIR FILTER HOSE AND BOX


AIR INTAKE AND AIR FILTER HOSE AND BOX CLAMP SCREW; loosen and then remove hose from box.




AIR INTAKE VALVE AND AIR INTAKE BOX TOP SEPARATED




OEM AIR INTAKE FILTER (DIRTY)






AIR INTAKE FILTER BOX (DIRTY)


AIR INTAKE FILTER BOX (CLEAN, vacuumed out)


K & N PERFORMANCE AIR FILTER






K & N PERFORMANCE AIR FILTER INSTALLED


FINISHED INSTALLATION WITH STICKER


Driving the car after this installation I felt an immediate difference in the throttle response and the pick up; was a lot faster so I'd recommend this easy mod to everyone! Thanks! :D
 

·
Registered
Joined
·
156 Posts
Nice! Its always good to have some DIY here.
 

·
Registered
Joined
·
109 Posts
Discussion Starter · #3 ·
Nice! Its always good to have some DIY here.
Thanks Ricer; its had 24 views, but you're the first one to make a comment :confused: :D
 

·
Registered
Joined
·
156 Posts
Thanks Ricer; its had 24 views, but you're the first one to make a comment :confused: :D
Guess the pictures were pretty self explanatory, so no questions.
 
1 - 4 of 4 Posts
Top